How To Sharpen Hair Clippers Blades! Guide

If you own a hair clipper and happen to utilize it on a regular basis, you’ll quickly wear out the blades.When this happens, the performance of the clipper will diminish dramatically and the blades may not properly cut your hair.

Instead of making a quick cut, the razor may pull the hair and result in excruciating pain throughout the duration of the shaving session.

When this happens, it may be time to replace your clipper’s blades. Alternative, you may want to try to sharpen the blades. Doing so will give you the ability to restore the razor to pristine condition, without spending excessively.

Below, you’ll learn everything you need to know about sharpening the blades of your hair clipper.

 How-To-Sharpen-Hair-Clippers-Blades

How To Tell When Blades Need Sharpened

How do you know when the blades of your clipper need to be sharpened? This is a question, which often stumps a large quantity of people.Thankfully, it is pretty simple actually.

If you notice that your clipper is cutting unevenly or you have to make a few more passes over the same area in order to make the cut, it is highly likely that you’ll need to sharpen the blades.

Another good indication that you need to sharpen the blades is if your clippers are pulling the hairs rather than cutting them. You will notice this right away, because it can be rather painful.

If you encounter any of the above mentioned situations, you will know that your blades need to be sharpened.

It is also a good idea to pay close attention to rust on the blades. If the blades have started to develop rust, it is essential to give them a thorough cleaning!

While removing the rust, it is wise to go ahead and sharpen the blades. This will prove to be more convenient and will save you time in the long run.


Remove The Blades

how to shapen hair clippers.jpg

How-To-Sharpen-Hair-Clippers-Blades

In order to sharpen the blades, you will first need to remove them from the clipper. Generally, you will need a simple screwdriver.

Usually, there will be two screws, which need to be completely removed in order to gain access to the blade.

In some cases, the blade may not detach from the base easily.

If this happens, you may need to utilize a pair of tweezers to gently pry the blades from the base.

Be very tedious during this process and pay close attention to the placement of each element removed, so you can put everything back together properly.

Removing Hair And Debris

Once the blades have been completely removed from the base, you’ll want to remove any hair and debris that has been left behind. This will help to make the sharpening process much easier.

Be sure to use a toothbrush or comb to remove these remnants, so you can sharpen the blades without making too much of a mess.

Eliminating Rust

In many cases, the blades will have started to develop rust. This will be easily visible on the blade and you’ll need to remove it, in order to restore the blades to excellent condition.

Using a combination of isopropyl alcohol and a little bit of water should do the trick! Do not weaken the alcohol too much, as this may decrease its effectiveness.

Test The Blades

Before sharpening the blades, it is essential to see whether or not they actually need it. Some blades are shelf-sharpening and won’t need to be sharpened very often.

Although this isn’t a necessity, it might be a good idea to go ahead and resemble the clipper at this point.

Once you’ve done so, you should try out the blades and see whether or not their performance has improved.

If it has and everything seems to be in working condition, you won’t need to sharpen the blades at all.

However, if the blades will tug on the hair and have a difficult time cutting, you’ll need to disassemble the clipper once more and proceed to the step below.

Use A Honor Stone

using stones

In order to properly sharpen the blades, you will need to utilize a sharpening stone. Once the blade has been cleaned and dried thoroughly, you’ll want to run the blade along the stone several times.

Be sure to pay close attention to the condition of the blade and stop sharpening it, when the blades become shiny and even. Once you’ve finished this step, you’ll want to go ahead and remove the metal powder.

Flip the blade over and repeat the process for the other side. If you happen to be working with a ceramic blade, you will need to utilize a diamond sharpening stone.

The good news is that ceramic blades do not need to be sharpened as frequently as other types.

Pay close attention to the manual that came with your clipper, so you figure out precisely how to sharpen your blades, without doing more harm than good.

If you feel that the blades aren’t sharp enough, you may want to repeat this procedure with a fine honing stone.

Use An Oil Stone

water-and-three-oil-stones

Stones have been used for centuries to sharpen all different types of blades. However, over the years, great improvements have been made to these stones in order to make them more effective.

An oilstone is a great way to go because it will produce a much smoother finish as compared to a grinding wheel.

To sharpen your clipper blades on the oilstone, just rub them back and forth on the stone until the reach the desired sharpness.

Be sure that your blade’s metal is compatible with the oil stone, before moving forward!

Reassemble, Oil, And Run It

Once you complete the cleaning process, you will need to oil the functional components. You can utilize a lubrication spray or oil for this process, but avoid adding more than just a few drops.

After you complete this step, you can go ahead and reassemble to clippers. Many people prefer to wait until the clippers are fully reassembled, before utilizing the spray lubricant.

The option is yours, but you cannot go wrong with either technique.

Now, you want to test the clipper out, just to make sure that everything is functioning properly.

If you notice any lose components, just immediately unplug the electric cable or flip the on/off switch to the off position.

Utilize a screwdriver to tighten up the screws, but be careful not to over tighten.

Retest the clippers again, just to make sure everything is tight and operating correctly.

Alternative Options

If you’re not willing to purchase the supplies needed to sharpen your blades, you may want to consider finding an alternative. There are two ways to get your blade sharpened, without doing it yourself.

In some cases, it may be possible to locate a commercial sharpening service within your area.

These businesses will utilize commercial sharpening stones to restore your blades to perfection rapidly.

It is also possible to ship the blades to one of these businesses, if you’re unable to find one within your local area.

Also, many clipper manufacturers will be more than willing to sharpen the blades for you.

If you speak with the manufacturer, they’ll provide you with a price and shipping address.

By sending your place to their facility, they’ll sharpen it and return it to you in perfect condition!

And of course, it is always possible to replace the blades completely.

This is a good option when the blades can no longer be sharpened sufficiently, but replacement blades will be slightly more expensive.

Leave a Comment