Back shavers are immensely beneficial and very convenient. As long as you purchase the right one, there is a good chance that you’re going to be able to use it for the rest of your life.
Of course, you need to understand that these products are not going to take care of themselves. If you want to get the most out of your back shaver, you’re going to need to properly maintain it.
This can be tougher than you could ever imagine. So, how do you maintain a back shaver? You’ll find out below.
Check The Batteries
A lot of back shavers are manual. This means that they do not need batteries whatsoever. However, there are a few shavers that do just batteries.
If you have a back shaver with batteries, you’re going to need to keep a close eye on the battery life. When the batteries begin to die out, the shaver’s power is going to decrease very rapidly.
Make sure that you keep changing the batteries when necessary to ensure that your shaver remains in tiptop shape for as long as humanly possible.
Wash The Handle
The blades are definitely the most important component of any back shaver. Nevertheless, you should also take care of the handle. After all, this is the portion of the shaver that you’re going to be touching all the time. The handle is going to collect a lot of germs and bacteria.
With this in mind, you should clean the handle as frequently as possible. Be sure to clean the handle using soap and water. This will remove the germs and bacteria.
While it depends on how frequently you use the back shaver, it is a good idea to clean the handle at least once or twice a week.
Be Cautious With It
When it comes down to it, these products can be somewhat fragile. This is why you need to be very cautious with them. You should never drop or toss your shaver.
Never pass your shaver to a friend or family member. If the shaver hits the ground very hard, there is a possibility that it is going to break. Make sure that you treat it gently from start to finish.
Grab it with your hand and move it carefully from one location to the next. This will prevent problems and ensure that your shaver lasts as long as humanly possible.
Cleaning The Head
Electric back shavers are extremely easy to maintain. All you need to do is keep the head free of hair. Most brands come with a small cleaning brush with bristles that will safely reach into the head to remove trapped hairs.
Some electric models are sealed, so you can place the head underneath running tap water to remove the trapped hairs. However, this does not mean the back shaver should be submersed in water, just that the head.
Cleaning a nonelectric back shaver is even easier to maintain. With these models, cleaning the head is as simple as removing the razor and rinsing it thoroughly with tap water.
Once the trapped hairs are completely removed, you can put the razor back into the head. This is the perfect time to make razor replacements, if you feel it necessary.
Store In A Safe, Dry Place
To protect your back shaver from moisture and the potential dangers lurking around a busy bathroom, you should keep it stored in a safe, dry place. Some electric models are foldable, so you can easily place them in a small drawer medicine cabinet.
Nonelectric models are a little more difficult to store, but some of these have a hole in the handle for easier storage. This design will allow you to store the razor upside down to drain excess water and for safety purposes.
Traveling With Your Back Shaver
If you are a frequent traveler or on-the-go man, you should use caution when traveling with your back shaver. As mentioned above, some electric models are designed to fold flat to make storage and transport easier.
However, you should still store your electric back shaver in a pouch or wrap it in a towel, before placing it in your gym or overnight bag. This will protect it from getting damaged during your trip.
Traveling with a nonelectric back shaver is a little more difficult, since most models are not foldable. It is crucial to protect the head at all cost. Doing so will prevent potential injury from the sharp blades.
If you do not have a pouch large enough for your nonelectric back shaver, you may want to consider investing in one. It will be in your best interest to remove the razor and store it in a safe location during your trip. A towel is a great alternative to a storage pouch.
Change The Blades On A Regular Basis
When it comes to achieving an effortless, clean, and close shave every time the blades can make all the difference in the world.
If you are trying to shave with dull blades this is only going to pull and tug at the hair rather than cut it. This is not only painful, but it can make the motor work harder if you are using a motorized shaver.
This is why changing out the blades on a regular basis is absolutely necessary when it comes to maintaining the integrity of your back shaver.
Of course, the longevity of the blades can vary depending on his thick your back hair is and how many times a week your shave it. This is why most experts will recommend going ahead and changing the blades at least once every month.
Consider Performance Enhancing Oils
You have probably seen a lot of individuals rinse their shaver blade in rubbing alcohol after a shave. This practice will not only sterilize the blade, but it can also go a long way to prevent rust build up.
While this is never really a bad ideal, you should be aware of the fact that rubbing alcohol could decrease the longevity of your blades.
So, how can you counteract this? Well, there are a variety of enhancing oils available on the market that will serve the same purpose of rubbing alcohol without eating away at the blades.
Just clean and dry your shaver head before applying a few drops and this will create a protective, liquid barrier that fights against corrosive oxidation. In addition to this, these performance-enhancing oils are excellent for the skin.
Always Dry Your Razor
Are you one of those individuals that have a wet back shaver that he utilizes in the shower? Perhaps, you always clean your shaver after shaving and just then just throw it under the skin.
While water is crucial for cleaning after a shave, it can cause rust if not properly dried. This is why it is imperative to always make sure that you are drying your shaver with a towel before storing it.
If you want to go the extra mile you can even pull out the hair dryer and blow-dry it.